|CODE||SHAFT/THREAD DIA.||INCH EQUIVALENT||PILOT HOLE||THREAD LENGTH||OVERALL LENGTH|
|MX21332||2.4mm | 3.5mm||3/32” | 9/64”||2.3mm||20mm||100mm|
|MX2133L||2.4mm | 3.5mm Long||3/32” | 9/64”||2.3mm||25mm||150mm|
|MX21180||3.2mm | 4.8mm||1/8” | 3/16”||3.1mm||32mm||140mm|
|MX2118L||3.2mm | 4.8mm Long||1/8” | 3/16”||3.1mm||45mm||175mm|
|MX21316||4.8mm | 6.3mm||3/16” | 1/4”||4.7mm||50mm||150mm|
|MX2131L||4.8mm | 6.3mm Long||3/16” | 1/4”||4.7mm||63mm||200m|
Centerface® fixation full-pins with cancellous thread profile feature a deep thread with larger thread pitch than standard thread Centerface® fixation full-pins. These pins have proven particularly effective in metaphyseal bone application where adequate bone stock is present to support the increased thread diameters. Acceptable locations include the proximal tibia and the distal femur only. Pre-drilling is very important. These pins are contraindicated in diaphyseal bone, in the radius or ulna, and in the hard bone of the humeral condyle. Rarely is more than one cancellous pin placed into a single ESF construct.
Standard length pins used in the majority of applications while extended length pins (part numbers indicated with an "L") are occasionally used when additional thread length is needed to span areas of larger bone diameter. Implant Quality 316LVM Stainless Steel.