Duraface® fixation half-pins are end-threaded, feature a TRO junction and a single trocar point. Six diameter choices are available with thread diameters ranging from 2.5mm to 4.8mm. Pre-drilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter.
Implant Quality 316LVM Stainless Steel. U.S. patent #8,282,676.
Part numbers ending with "L" indicate extended length pins.
See Specifications Tab for product details
|CODE||SHAFT / THREAD DIAMETER||INCH EQUIVALENT||PILOT HOLE||THREAD LENGTH||OVERALL LENGTH|
|MX17020||2.5mm | 2.5mm||—||2.0mm||20mm||95mm|
|MX17332||3.2mm | 3.2mm||1/8" | 1/8"||2.3mm||25mm||100mm|
|MX1733L||3.2mm | 3.2mm||1/8" | 1/8"||2.3mm||31mm||150mm|
|MX17764||3.5mm | 3.5mm||9/64" | 9/64"||2.7mm||28mm||110mm|
|MX1776L||3.5mm | 3.5mm||9/64" | 9/64"||2.7mm||50mm||150mm|
|MX17180||4.0mm | 4.0mm||5/32" | 5/32"||3.1mm||31mm||115mm|
|MX1718L||4.0mm | 4.0mm||5/32" | 5/32"||3.1mm||50mm||150mm|
|MX17964||4.3mm | 4.3mm||—||3.5mm||35mm||130mm|
|MX1796L||4.3mm | 4.3mm||—||3.5mm||54mm||175mm|
|MX17532||4.8mm | 4.8mm||3/16" | 3/16"||3.9mm||38mm||150mm|
|MX1753L||4.8mm | 4.8mm||3/16" | 3/16"||3.9mm||57mm||200mm|