|CODE||SHAFT/THREAD DIA.||INCH EQUIVALENT||PILOT HOLE||THREAD LENGTH||OVERALL LENGTH|
|MX2231LA||4.8mm | 6.3mm||3/16" | 1/4"||4.7mm||64mm||200mm|
|MX22140||6.3mm | 8.0mm||1/4" | 5/16"||6.2mm||65mm||200mm|
Duraface® full-pins are a significant improvement compared to historically used positive-profile pins. These pins feature a larger shaft on the “near” end of the pin and a tapered run-out feature at the thread-shaft junction to attenuate any potential stress riser, resulting in a pin with increased bending resistance and enhanced cyclic fatigue life compared to positive-profile pins
These pins along with related drill bits and taps are designed for lower limb application in large animal patients. Both pin sizes incorporate three chuck flats on the blunt end for securing the pin into a Jacobs chuck. Pre-drilling and tapping are required.