Duraface® NP (No-Point) fixation half-pins are end-threaded and feature a TRO junction. A truncated, blunt trocar improves surgeon safety, decreases patient morbidity and requires pre-drilling. Six diameter choices are available with thread diameters ranging from 2.5mm to 4.8mm.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter.
Implant Quality 316LVM Stainless Steel. U.S. patent #8,282,676.
Part numbers ending with "L" indicate extended length pins.
See Specifications Tab for product details
|CODE||SHAFT/THREAD DIAMETER||INCH EQUIVALENT||PILOT HOLE||THREAD LENGTH||OVERALL LENGTH|
|MX17020NP||2.5mm | 2.5mm||—||2.0mm||20mm||95mm|
|MX17020SNP||2.5mm | 2.5mm Short||—||2.0mm||10mm||80mm|
|MX17332NP||3.2mm | 3.2mm||1/8" | 1/8"||2.3mm||25mm||100mm|
|MX1733LNP||3.2mm | 3.2mm Long||1/8" | 1/8"||2.3mm||31mm||150mm|
|MX17332SNP||3.2mm | 3.2mm Short||1/8" | 1/8"||2.3mm||15mm||90mm|
|MX17764NP||3.5mm | 3.5mm||9/64" | 9/64"||2.7mm||28mm||110mm|
|MX1776LNP||3.5mm | 3.5mm Long||9/64" | 9/64"||2.7mm||50mm||150mm|
|MX17764SNP||3.5mm | 3.5mm Short||9/64" | 9/64"||2.7mm||18mm||95mm|
|MX17180NP||4.0mm | 4.0mm||5/32" | 5/32"||3.1mm||31mm||115mm|
|MX1718LNP||4.0mm | 4.0mm Long||5/32" | 5/32"||3.1mm||50mm||150mm|
|MX17180SNP||4.0mm | 4.0mm Short||5/32" | 5/32"||3.1mm||21mm||100mm|
|MX17964NP||4.3mm | 4.3mm||—||3.5mm||35mm||130mm|
|MX1796LNP||4.3mm | 4.3mm Long||—||3.5mm||54mm||175mm|
|MX17964SNP||4.3mm | 4.3mm Short||—||3.5mm||24mm||120mm|
|MX17532NP||4.8mm | 4.8mm||3/16" | 3/16"||3.9mm||38mm||150mm|
|MX1753LNP||4.8mm | 4.8mm Long||3/16" | 3/16"||3.9mm||57mm||200mm|
|MX17532SNP||4.8mm | 4.8mm Short||3/16" | 3/16"||3.9mm||27mm||140mm|
Also see Duraface Fixation Half-pins for Pointed