Interface® fixation half-pins with cancellous thread profile feature a deep thread with larger pitch than standard thread Interface® fixation pins. These pins have proven particularly effective in soft metaphyseal bone application where adequate bone stock is present to support the increased thread diameters. Acceptable locations include the proximal tibia, the distal femur, and the proximal humerus only. Pre-drilling is very important. These pins are contraindicated in diaphyseal bone, in the radius or ulna, and in the hard bone of the humeral condyle. Rarely is more than one cancellous pin placed into a single ESF construct. 
Standard length pins used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. 
Implant Quality 316LVM Stainless Steel.

Part numbers ending with "L" indicate extended length pins.

See Specifications Tab for product details

(MX16000-PA)

CODE SHAFT / THREAD DIAMETER INCH EQUIVALENT PILOT HOLE THREAD LENGTH OVERALL LENGTH
MX16332 2.4mm | 3.5mm 3/32” | 9/64” 2.3mm 28mm 115mm
MX1633L 2.4mm | 3.5mm 3/32” | 9/64” 2.3mm 31mm 150mm
MX16180 3.2mm | 4.8mm 1/8” | 3/16” 3.1mm 35mm 125mm
MX1618L 3.2mm | 4.8mm 1/8” | 3/16” 3.1mm 50mm 150mm
MX16316 4.8mm | 6.3mm 3/16” | 1/4” 4.7mm 50mm 150mm
MX1631L 4.8mm | 6.3mm 3/16” | 1/4” 4.7mm 57mm 200mm
SKU MX16000-PA
Brand IMEX

Others Also Bought

More From This Category